Teseq Malaysia: EMC Test Equipment and Calibration

Model finder

Every current Teseq model, by test

162 models and series in twelve families. Models marked in red have their own page on this site; the others open the manufacturer's product page with the datasheet. To ask for a quotation, send us the model number.

ESD Burst and surge RF immunity CDN CDND, CN, CDNE HV-AN and ISN Probes and clamps Amplifiers RF components Antennas GTEM and striplines Automotive

Teseq ESD simulators: NSG 437 and NSG 438

Electrostatic discharge simulators for IEC 61000-4-2 and ISO 10605, up to 30 kV. The NSG 435 is discontinued and remains in service in many laboratories, where we continue to calibrate it.

ESD simulator calibration →Note: IEC 61000-4-2 Edition 3.0 changes →

NSG 435 (discontinued)NSG 437 NSG 438/NSG 438A MD 102A

Teseq NSG 3040A, NSG 3060A and NSG 3150: burst, surge and ring wave

Multifunction transient generators for IEC 61000-4-4 burst, IEC 61000-4-5 surge and IEC 61000-4-12 ring wave, with the CDN 3000A, CDN 3153, CDN 117A and CDN 118A coupling networks and the VAR 3005A variac for dips and variations.

EFT/burst calibration →Surge calibration →Dips tester calibration →

NSG 3040A models NSG 3060A models NSG 3150 Family CDN 117A/118A family CDN HSS-2 CDN 3000A series CDN 3153 series VAR 3005A-S16

Teseq NSG 4070 and NSG 6000A: RF immunity test systems

Signal generators and integrated systems for IEC 61000-4-6 conducted immunity, IEC 61000-4-3 radiated immunity, IEC 61000-4-16 and IEC 61000-4-31, with the CIS and icd.control software.

Medical device test system →On-site immunity kit →

NSG 4070D NSG 4070C2 NSG 4070C2-LFCP NSG 6000A NSG 4060B1 NSG 4031A CIS icd.control

Teseq CDN M, CDN AF, CDN S and CDN T: coupling and decoupling networks

Common-mode coupling and decoupling networks for IEC 61000-4-6 on mains, unscreened, screened and balanced lines, in versions from 10 kHz and from 150 kHz.

CDN calibration →Note: using fewer lines of a multi-line CDN →

Teseq CDND, CN and CDNE networks

Differential-mode networks for IEC 61000-4-19 and IEC 61000-4-31, coupling networks and transformers for IEC 61000-4-16 and IEC 60255-26, and CDNE networks for CISPR 15 emission measurement from 30 MHz to 300 MHz.

CDN calibration →

CDND IEC/EN 61000-4-31 CDND IEC/EN 61000-4-19 CAS CDND19 CAS CDND31 CN 4-16 A Series CN 4-16 for M2 & M3 Lines CN 4-16 for M4 & M5 Lines CN 4-16 for T4 Lines CN 4-16 for T8 Lines CN 60255-26 CT 419-5 ITF CDNE M2 CDNE M3 CAS CDNE

Teseq HV-AN artificial networks and ISN

High-voltage artificial networks for automotive emission measurement and impedance stabilisation networks for telecommunication and data ports.

LISN and ISN calibration →Note: what a LISN, ISN or CDN calibration must measure →

HV-AN 150 HV-AN 1uH-200-VW80300 HV-AN 1uH-800-VW80300 HV-AN 1u-Rxxx Series HV-AN 200 HV-AN 500 ISN PLT-A ISN S1 Coaxial ISN ST08 Series ISN T2 Series ISN T8-Cat5 Series ISN T8-Cat6 Series ISN T8 Series CAS ISN FIX ISN

Teseq KEMZ 801B, CIP 9136A, MDS 21B and CMAD: probes and clamps

EM clamps, bulk current injection probes, current sensing probes, absorbing clamps, CMADs and capacitive voltage probes for IEC 61000-4-6, ISO 11452-4 and CISPR 16, with their calibration fixtures.

Probe and clamp calibration →

CAL CMAD20A CAL KEMZ CMAD 10 CMAD 20B FT 801 KEMA 801B MBT 2 (for MDS 21)MDS 21B CAL 801A KEMZ 801B CIP 9136A CIP 9138 PCJ 9201B PCJ 9202 CSP 9160A DMD 4070 MD 4070 MDP 4070 CVP 2200A

Teseq CBA solid-state amplifiers

Solid-state broadband amplifiers to 1 GHz, 6 GHz and 8 GHz for conducted and radiated immunity.

Amplifier and RF component calibration →

CBA 100M A Series CBA 80M1G E Series CBA 230M A Series CBA 250M A Series CBA 400M A Series CBA 4K400M E Series CBA 4G D Series CBA 4G R Series CBA 6G D Series CBA 6G R Series CBA 4G8G D Series CBA 1G D Series

Teseq RF system components

Preamplifiers, power meters, RF switches, attenuators, directional couplers and accessories that complete an RF immunity or emission system.

Power meter calibration →RF component calibration →

LNA 6900 LNA 6901 PMx 6096 RFB 6000A SW 4070 SW 6012 ATN 6 Series DCP 0100B BAL 4070 CAS BAL4070 LE 4031 RAD 6000 TP 16

Teseq CBL bilog, TEM Horn and loop antennas

Bilog antennas for emission and immunity, the TEM Horn for IEC 61000-4-39, and the HLA and LAS loop antennas.

Antenna calibration →

BTP 6020 CBL 6111D CBL 6112D CBL 6141B CBL 6143A TEM Horn TEM Probe HLA 6020 LAS 6100 LAS 6120 CTP 6099

Teseq GTEM cells, striplines and reverberation chambers

GTEM 250 to GTEM 2000 cells for IEC 61000-4-20, the D-TEM cell, SL and TPL striplines for ISO 11452-5, and compact reverberation chambers for IEC 61000-4-21.

GTEM 250 GTEM 500 GTEM 750 GTEM 1000 GTEM 1250 GTEM 1500 GTEM 1750 GTEM 2000 MPH MPC GTEM Immunity Test Systems D-TEM RC Chamber 2XS RC Chamber XS RC Stirrer S RC Stirrer M RC Stirrer L SL 150 SL 50 SL 90 TPL 3000

Teseq NSG 5500 and automotive transient systems

Transient immunity and emission on vehicle supply lines to ISO 7637 and manufacturer standards, with the PA 5740 and PA 5840 four-quadrant battery simulators.

ISO 7637 generator calibration →EV component test bench →

FLX 5510 JT 5510 JT 5550 LD 5550 MT 5511 NSG 5071 NSG 5500 AES 5501 CDN 500 PA 5740 Series PA 5840 Series +DS Option +ARB Option

Frequently asked

Teseq in Malaysia

Who is the Teseq distributor in Malaysia?

ICX Lab Services in Penang is the authorised distributor of AMETEK CTS products, and Teseq is one of the brands under AMETEK CTS, together with EM TEST and AR. We quote, deliver, install and support the full Teseq range.

Is Teseq the same company as Schaffner?

Teseq was the test systems division of Schaffner until 2006, when it became an independent company under the Teseq name. It has been part of AMETEK since 2014. Instruments labelled Schaffner and Teseq share the same model families, and both are supported and calibrated.

Can you calibrate a Teseq or Schaffner instrument we already own?

Yes. Calibration is performed against the requirements of the test standard, on site in your laboratory, under the A2LA accredited ISO/IEC 17025 scope of LAB Support Ltd. It does not matter where or when the instrument was bought.

Does the Teseq NSG 437 or NSG 438 meet IEC 61000-4-2 Edition 3.0?

Yes. The NSG 437 and NSG 438 comply with the 2025 edition. Our technical note on IEC 61000-4-2 Edition 3.0 explains what changed for the generator and its calibration.

How do I get a price for a Teseq model?

Send us the model number, or the standard and the product you test, through the contact page or WhatsApp. We reply with a configuration and a quotation. Quotations on request.

Do you also supply EM TEST and AR?

Yes. All three AMETEK CTS brands are quoted together as one system. See all EM TEST models and the AMETEK CTS overview.

Teseq is a brand of AMETEK Compliance Test Solutions. Model names and images are taken from ametek-cts.com. Specifications are subject to change; refer to the manufacturer's datasheets.

Teseq EMC test equipment in Malaysia

The same instruments, under three names

Eight Teseq models we are asked for most

NSG 437

NSG 438 and NSG 438A

NSG 3040A

NSG 4070C2

NSG 6000A

CDN M2/3 (CDN M016)

CBA 80M1G E series

KEMZ 801B