Teseq · ESD simulator

Teseq NSG 437

A 30 kV ESD simulator for IEC 61000-4-2 and ISO 10605 in a light version with uncompromising test performance.

Request a quotation Datasheet at ametek-cts.com
Teseq NSG 437 ESD simulator
Key facts

Teseq NSG 437 at a glance

  • Air and contact discharge to 30 kV
  • Colour touch panel showing the operating conditions at all times
  • Voltage-hold function
  • Activity log of what was tested and when
  • Discharge networks that change quickly, with more than 60 optional networks for vehicle manufacturer standards
  • Discharge detector with adjustable threshold, which can be switched off for non-conductive surfaces
  • Pre-programmed settings for IEC 61000-4-2 and ISO 10605, with the RC value in use always displayed

Figures from the manufacturer's product page. Specifications are subject to change; the datasheet governs. Quotations on request.

Where it fits

What the NSG 437 is used for

The NSG 437 is the simulator we are asked for most by laboratories that test to IEC 61000-4-2 every day and to ISO 10605 when an automotive job arrives. Polarity, repetition rate, counters and discharge detection are all available up to the full 30 kV, and the display language can be selected by the operator.

The discharge networks are moulded high-voltage parts in solid cases, which keeps ionisation and leakage from changing the waveform. The 150 pF and 330 Ω network of IEC 61000-4-2 is exchanged quickly for an ISO 10605 network, and the simulator always shows the RC value in use.

Standards named by the manufacturer

IEC 61000-4-2ISO 10605
Calibration

Calibrated on site, by the people who supplied it

ESD simulators are within the accredited scope, including the NSG 437. The NSG 437 meets the 2025 edition of IEC 61000-4-2. Calibration is carried out in your laboratory by the LAB Support Southeast Asia team, under the A2LA accredited ISO/IEC 17025 scope of LAB Support Ltd.

ESD simulator calibration →
Related

Goes with the NSG 437

Note: what IEC 61000-4-2 Edition 3.0 changed →Teseq NSG 438 and NSG 438A →EM TEST esd NX30 →All Teseq models →
Frequently asked

Teseq NSG 437 in Malaysia

Does the Teseq NSG 437 meet IEC 61000-4-2 Edition 3.0?

Yes. The NSG 437 complies with the 2025 edition. Our technical note on IEC 61000-4-2 Edition 3.0 explains what changed for the generator and its calibration.

Where can I buy the Teseq NSG 437 in Malaysia?

ICX Lab Services in Penang is the authorised distributor of AMETEK CTS products, and Teseq is one of the brands under AMETEK CTS, together with EM TEST and AR. Send us the model number through the contact page or WhatsApp and we reply with a configuration and a quotation. Quotations on request.

Who installs and supports the NSG 437 after delivery?

We do. ICX Lab handles delivery, installation and training, and coordinates factory service, firmware and repairs with AMETEK CTS on your behalf.

Teseq is a brand of AMETEK Compliance Test Solutions. Product name, specifications and image are taken from ametek-cts.com.

Need a quotation for the NSG 437?

Tell us the standards you test to and we will configure it with the accessories it needs.

Request a quotation   All Teseq models

Tell us what you need to test

We reply within one working day with a quote or a plan.

Contact us