Accredited EMC Calibration On Site in Malaysia

Two ways to calibrate

On site in your lab, or in the laboratory in Japan

Our main service

On site in Malaysia, Singapore and Vietnam

The LAB Support Southeast Asia team brings the reference standards to your laboratory and calibrates your instruments where they are used.

No shipping, no customs, no weeks without your generator
Whole systems calibrated as installed: LISNs on the bench, antennas in the chamber, site attenuation and site VSWR in the room itself
Witness the measurement and receive the accredited certificate under certificate 2127.01
Scheduled around your test bookings

When the lab is the better place

In the laboratory in Japan

For instruments that need the laboratory environment or the lowest uncertainty.

Calibration at LAB Support's laboratory in Azumino, Nagano
ICX Lab arranges collection, export and return
Same accredited scope, laboratory CMC uncertainties

How an on-site visit works

Four steps, no shipping

Send your instrument listModel, serial number and the standard you test to. We confirm each item against the accredited scope and quote.

Schedule the visitWe agree dates that fit your test bookings and plan the sequence so your laboratory keeps running.

We calibrate in your labTravelling reference standards, traceable to national standards, operated by the LAB Support Southeast Asia team under the accredited procedures.

Certificate on siteAccredited certificate with measurement uncertainty, issued under A2LA certificate 2127.01, and a reminder before the next due date.

Accredited scope

What the scope covers

Grouped from LAB Support's A2LA scope of accreditation. Every group includes parameters marked for field calibration.

Equipment	Parameters in the accredited scope	Standards named in the scope
ESD simulators	Contact discharge current to 30 kV, air and contact voltage indication, rise time, RC time constant	IEC/EN 61000-4-2, ISO 10605
EFT/burst generators	Peak amplitude into 50 Ω and 1000 Ω, rise time, impulse duration, burst duration and period, repetition frequency	IEC/EN 61000-4-4
Surge generators	Open-circuit voltage, short-circuit current, front time, time to half value, phase shifting	IEC/EN 61000-4-5
Dips and power-quality testers	Output voltage to 260 V DC, inrush current, phase angle, rise and fall time, dropout and repetition time	IEC/EN 61000-4-11
Automotive transient generators	Surge, load dump and burst pulse amplitude, rise and fall time, pulse duration and repetition, transient emission switching time	ISO 7637 series
Harmonics and flicker systems	AC current including harmonics to 200 A, power 35 W to 6000 W, THD, flicker Pst	IEC 61000-3-2, IEC 61000-3-3
LISN, AMN, CDN, ISN, clamps and probes	Voltage division factor, insertion loss, isolation, impedance and phase, EM clamp coupling and decoupling factors, current probe transfer impedance, ESD target insertion loss	CISPR 16-1-2, IEC 61000-4-6
Antennas	Antenna factor for loop, monopole and rod, biconical, hybrid, dipole, log-periodic and horn antennas, antenna symmetry and balance	CISPR 16-1-6, ANSI C63.5
Test sites and chambers	Normalised site attenuation, NSIL, site VSWR, ALSE performance validation, shielding effectiveness	CISPR 16-1-4, ANSI C63.4, CISPR 25
EMI receivers and spectrum analysers	Level, attenuator and reference level accuracy, frequency response, bandwidth and selectivity, pulse repetition response, CW-pulse amplitude comparison, noise floor, harmonics and sub-harmonics	CISPR 16-1-1, ANSI C63.2
RF signal generators	Output level, harmonics, AM depth to 99 %, FM deviation to 500 kHz, pulse modulation rise and fall time and pulse width, frequency
RF power meters and sensors	RF power -120 dBm to +40 dBm, sensor calibration factor, sensor linearity -40 dBm to +20 dBm, power reference output
Oscilloscopes	Amplitude into 50 Ω and 1 MΩ, DC signal, bandwidth, trigger sensitivity, time interval and frequency
Network analysers, attenuators, cables, couplers, amplifiers	S-parameters, magnitude and phase, 5 Hz to 40 GHz; insertion loss, return loss, coupling, amplifier gain
General electrical	DC and AC voltage and current, resistance, capacitance, inductance, frequency

Download the full A2LA scope of accreditation (PDF) →

Brands we calibrate

Most of the instruments we calibrate come from these manufacturers. The accredited scope is defined by parameter and range, not by brand, so ask us about any make or model.

TeseqEM TESTRohde & SchwarzSchwarzbeckKeysightFischer Custom CommunicationsSchaffnerHaefelyARand others

Our partner

LAB Support Ltd., Japan

LAB Support Ltd. is an A2LA accredited calibration laboratory in Azumino, Nagano, that specialises in EMC test equipment and supports test laboratories through their own accreditation. Its Southeast Asia team, working with ICX Lab in Penang, delivers the same accredited calibration on site in Malaysia, Singapore and Vietnam.

Accredited to ISO/IEC 17025:2017 by A2LA, recognised through the ILAC mutual recognition arrangement
Field calibration included in the accredited scope
Calibration methods aligned to the IEC, CISPR, ISO and ANSI standards your laboratory is assessed against
Certificates that state uncertainty and traceability for every reported value

Ask about scope coverage

What auditors will ask

Straight answers on on-site uncertainty

The A2LA scope states that uncertainties achieved at a customer's site can be larger than the laboratory CMC values, because of the site environment, transport of the reference standards and the resolution of the instrument being calibrated. Every on-site certificate states the uncertainty actually achieved in your laboratory, and we tell you before the visit if an instrument would be better served in the laboratory in Japan.

Questions

Frequently asked

Do you come to our laboratory?

Yes. On-site calibration is our main service in Malaysia, Singapore and Vietnam. The LAB Support Southeast Asia team brings the reference standards to you and calibrates your instruments where they are used.

Is an on-site certificate as valid as one from the laboratory?

Yes. Field calibration is part of LAB Support's A2LA accredited scope, so on-site certificates are issued under the same certificate number, 2127.01, with the uncertainty actually achieved in your laboratory stated on the certificate.

Which equipment can be calibrated on site?

Transient and ESD generators, dips and power-quality testers, harmonics and flicker systems, LISNs, CDNs and probes, antennas, EMI receivers, RF signal generators, power meters and sensors, oscilloscopes, and site validation such as NSA and site VSWR. Send your list and we confirm item by item against the scope.

How long does a visit take?

It depends on the number and type of instruments. We plan the sequence with you so the laboratory keeps running, and confirm the schedule in the quotation.

What if an instrument is not in the field scope?

We tell you before the visit. Such instruments can be calibrated at LAB Support's laboratory in Japan, and ICX Lab arranges collection, export and return.

Can you calibrate equipment from any manufacturer?

Yes. Calibration is performed against the requirements of the test standard, not the brand, so generators, networks and antennas from all major manufacturers are supported, including the AMETEK CTS equipment we supply.

Will you remind me when calibration is due?

Yes. We keep a record of every instrument we calibrate and contact you ahead of the next due date so your accreditation is never at risk from an expired certificate.

Accredited calibration, on site, by a local team