AMETEK Compliance Test Solutions · EM TEST · Teseq · AR

EMC test equipment for every immunity and emission standard

AMETEK CTS brings together EM TEST, Teseq and AR: transient and power-quality generators, ESD simulators, RF immunity systems, coupling networks, amplifiers, antennas and GTEM cells. ICX Lab is the authorised distributor, from quotation to installation and after-sales support.

Request a quotation Browse product groups
Three brands, one supplier

Specialists in each part of the EMC test bench

EM TEST
Teseq
AR
EM TESTTransient generators, power-quality and harmonics test systems, automotive supply-voltage and battery simulation, ESD.
TeseqRF immunity systems, ESD simulators, coupling and decoupling networks, antennas, GTEM cells, striplines and reverberation chambers.
ARRF and microwave amplifiers and field-generation systems for radiated immunity testing.
Product groups · Transient and surge

Burst, surge, ring wave and coupling networks

EM TEST transient generator

Transient generators: surge and burst

IEC 61000-4-4 burst and IEC 61000-4-5 surge in combined or single-function generators, with telecom surge and 8/20 µs current surge.

  • EM TEST compact NX5 and NX7, burst NX8, VCS 500N series, TSS 500N telecom surge, vsurge NX, CSS 500N2
  • Teseq NSG 3040A, NSG 3060A, NSG 3150 family
  • Coupling networks CDN 3000A, coupling NX5/NX7, DCD 5 and 7, HSC 4-8.1

Details at ametek-cts.com →

Ring wave coupling network

Ring wave and damped oscillatory

IEC 61000-4-12 ring wave and IEC 61000-4-18 slow damped oscillatory wave immunity with matching coupling networks.

  • EM TEST compact NX7, OCS 500N6 and OCS 500N6F, CNV 504N5.1 and CNV 508N4 coupling networks
  • Teseq NSG 3060A

Details at ametek-cts.com →

ESD simulator

Electrostatic discharge

ESD simulators for IEC 61000-4-2 and ISO 10605 with the reproducibility a compliance lab needs.

  • EM TEST dito (16 kV), esd NX30 series (30 kV)
  • Teseq NSG 437 (30 kV), NSG 438 and NSG 438A (30 kV)

Details at ametek-cts.com →

Product groups · Power quality

Dips, harmonics, flicker and programmable power

Power fail simulator

Dips, interrupts and variations

Single and three-phase solutions for IEC 61000-4-11, -4-29 and -4-34.

  • EM TEST PFS 503N and PFS 503Nx.2 power fail simulators, variac NX1 and MV 3P motor variacs
  • Teseq VAR 3005A motor variac
  • TVT 1-250 stepped transformers

Details at ametek-cts.com →

Harmonics and flicker analyser

Harmonics and flicker

Complete measurement systems for IEC 61000-3-2, -3-3, -3-11 and -3-12: analyser, source and reference impedance.

  • EM TEST DPA 500N and DPA 503N digital power analysers, AIF 503N flicker impedances
  • ACS 500N and ACS 503N sources, NetWave 3 to 108 series

Details at ametek-cts.com →

Programmable AC/DC power source

Programmable AC/DC power sources

Single and three-phase sources for EMC, MIL and avionics, and electric-vehicle testing.

  • EM TEST NetWave series, PowerWave 250 and PowerWave 250-DC

Details at ametek-cts.com →

Product groups · RF immunity and emission

RF generators, coupling networks, probes and components

RF immunity test system

RF immunity test systems

Signal generators and integrated systems from 15 Hz to 6 GHz for IEC 61000-4-6, -4-3, -4-16 and -4-31.

  • Teseq NSG 4070C2 and NSG 4070D, NSG 6000A, NSG 4060B1, NSG 4031A broadband noise
  • EM TEST CWS 500N3, AMP 200N
  • CIS and icd.control software

Details at ametek-cts.com →

CDN coupling and decoupling network

RF CDN, common mode

Coupling and decoupling networks for IEC 61000-4-6 on power, signal and bus lines.

  • Teseq CDN AF, CDN AF CAN, CDN M, CDN S and CDN T series from 10 kHz or 150 kHz

Details at ametek-cts.com →

CDND differential mode network

RF CDND, differential mode

Differential-mode coupling for IEC 61000-4-19 and IEC 61000-4-31.

  • Teseq CDND series for IEC 61000-4-19 and IEC 61000-4-31

Details at ametek-cts.com →

CN coupling network

CN and transformers

Coupling networks for IEC 61000-4-16 and IEC 60255-26 conducted common-mode disturbances.

  • Teseq CN series and coupling transformers

Details at ametek-cts.com →

CDNE emission network

CDNE emission networks

Disturbance-voltage measurement to CISPR 15 edition 9 using CDNE networks.

  • Teseq CDNE series and accessories

Details at ametek-cts.com →

HV-AN artificial network

HV-AN and ISN

Artificial networks and impedance stabilisation networks for automotive and telecom emission measurements.

  • Teseq HV-AN 150, HV-AN 200, HV-AN 500 and HV-AN 1u-R series, ISN series

Details at ametek-cts.com →

Absorbing clamp

Probes and clamps

Absorbing clamps, EM clamps, current injection and sensing probes and capacitive voltage probes for CISPR 16 and IEC 61000-4-6.

Details at ametek-cts.com →

RF attenuators

RF system components

Attenuators, directional couplers, power meters, preamplifiers, RF switches, cables and kits to complete an RF immunity or emission system.

Details at ametek-cts.com →

Automotive EMC

From ISO 7637 transients to LV 124 supply profiles

Component-level test systems for the OEM standards your customers specify, with battery simulation that keeps up with fast supply-voltage profiles.

ISO 7637-2 / -3ISO 16750-2LV 124 / LV 148CISPR 25ISO 10605OEM specifications
Product groups · Automotive

Transients, supply voltage, battery simulation and magnetic fields

Automotive transient immunity generator

Automotive electrical disturbances

Transient immunity and transient emission on supply lines to ISO 7637 and OEM standards.

  • Teseq NSG 5500, NSG 5071, FLX 5510, JT 5510 and JT 5550, LD 5550, MT 5511, AES 5501 emission
  • EM TEST UCS 200N, LD 200N, RCB 200N1, Transient Emission Set

Details at ametek-cts.com →

Ripple generator

Automotive supply voltage variations

Dips, dropouts, ripple and arbitrary supply profiles to LV 124, LV 148 and ISO 16750-2.

  • EM TEST AutoWave arbitrary waveform generator, Ripple NX, AMP 200N, PFS 200N and PFM 200N, VDS 200Qx.2, CN 200N coupling networks
  • Compliance Test Studio software

Details at ametek-cts.com →

Four-quadrant battery simulator

Battery simulators

One, three and four-quadrant battery replacements with the slew rate and power that automotive profiles demand.

  • Teseq PA 5740 and PA 5840 series
  • EM TEST VDS 200Q10.1, VDS 200Qx.2, VDS 200R, RDS 200N1

Details at ametek-cts.com →

Magnetic field antenna

Magnetic fields

Power-frequency, pulse and DC magnetic field immunity for IEC 61000-4-8, -4-9 and -4-10 and automotive DC fields to 4000 A/m.

  • MFG 40-100, MFT 30 and MFT 100 generators; MFC 30, 300 and 1000 loops
  • EM TEST AMP 200N with automotive DC magnetic field kits

Details at ametek-cts.com →

Product groups · Radiated immunity and test environments

Amplifiers, antennas, GTEM cells and chambers

Solid-state RF amplifier

Solid-state amplifiers

Broadband and single-band amplifiers to 1 GHz, 6 GHz and 8 GHz for radiated and conducted immunity.

  • Teseq CBA 100M A, CBA 80M1G E, CBA 230M / 250M / 400M A, CBA 4K400M E, CBA 4G and 6G D and R series, CBA 4G8G D
  • AR RF and microwave amplifier ranges

Details at ametek-cts.com →

Biconical antenna

Antennas

Bilog, horn and loop antennas for emission measurement and immunity field generation.

  • Teseq bilog CBL 6111D, CBL 6112D, CBL 6141B, CBL 6143A, BTP 6020
  • TEM Horn to 18 GHz, TEM Probe
  • Loop HLA 6020, LAS 6100 and LAS 6120, CTP 6099

Details at ametek-cts.com →

GTEM cell

GTEM, TEM, striplines and reverberation

Compact test environments for IEC 61000-4-20, ISO 11452-5 and IEC 61000-4-21.

  • Teseq GTEM 250 to GTEM 2000 and predefined GTEM immunity systems, D-TEM cell
  • Striplines SL 50, SL 90, SL 150, TPL 3000
  • RC Chamber 2XS and XS, RC Stirrer S, M and L

Details at ametek-cts.com →

Standards map

Which AMETEK family tests which standard

A quick way to find the right product group from the standard on your test plan.

STANDARDTESTAMETEK CTS FAMILY IEC 61000-4-2Electrostatic dischargedito, esd NX30, NSG 437, NSG 438 IEC 61000-4-4Electrical fast transient / burstcompact NX5 / NX7, burst NX8, NSG 3040A, NSG 3060A IEC 61000-4-5Surge, telecom surge, current surgecompact NX, VCS 500N, NSG 3150, TSS 500N, CSS 500N2 IEC 61000-4-6Conducted RF immunityNSG 4070C2 / D, CWS 500N3, CDN AF / M / S / T, EM clamp IEC 61000-4-3Radiated RF immunityNSG 6000A, CBA and AR amplifiers, antennas, GTEM systems IEC 61000-4-8 / -9 / -10Magnetic field immunityMFG 40-100, MFT 30 / 100, MFC loops IEC 61000-4-11 / -29 / -34Dips, interruptions, variationsPFS 503N, variac NX1, VAR 3005A, NetWave IEC 61000-4-12 / -18Ring wave, damped oscillatorycompact NX7, OCS 500N6 / N6F, NSG 3060A IEC 61000-4-16 / -19 / -31LF common mode, differential, broadbandCN series, NSG 4060B1, CDND, NSG 4031A IEC 61000-3-2 / -3-3Harmonics and flickerDPA 500N, ACS 500N, NetWave, AIF 503N ISO 7637, ISO 16750, LV 124Automotive transients and supplyNSG 5500, UCS 200N, AutoWave, VDS 200Q, PA 5740 CISPR 15 / 16 / 25Emission networks and probesCDNE, HV-AN, ISN, absorbing clamps, probes, antennas
Why through ICX Lab

Buy the generator and keep it in calibration with one partner

Quotation and deliveryConfiguration advice, pricing, import and delivery handled from Penang.
Part of a turn-key systemAMETEK generators and amplifiers integrated with Frankonia chambers and Nexio BAT-EMC software as one commissioned laboratory.
Calibration afterwardsESD, burst, surge and dips generators, CDNs and antennas are all in the A2LA accredited scope, so we can calibrate them on site in your laboratory.
Service and upgradesWe coordinate factory service, firmware and hardware upgrades and repairs with AMETEK CTS on your behalf.

Product names, model families and images are those of AMETEK Compliance Test Solutions and its EM TEST, Teseq and AR brands, taken from ametek-cts.com. Specifications are subject to change; refer to the manufacturer's datasheets. Use the AMETEK product selector to search by standard, then contact us for a quotation.

Tell us what you need to test

We reply within one working day with a quote or a plan.

Contact us