Teseq · ESD simulators

Teseq NSG 438 and NSG 438A

The 30 kV ESD simulator for IEC 61000-4-2, ISO 10605 and vehicle manufacturer standards, with a battery rated for long test runs at full voltage.

Request a quotation Datasheet at ametek-cts.com
Teseq NSG 438 and NSG 438A ESD simulators
Key facts

Teseq NSG 438 and NSG 438A at a glance

  • Air and contact discharge to 30 kV
  • Battery tested to 30,000 discharges at 30 kV
  • Colour touch panel control
  • Voltage-hold function
  • Activity log of what was tested and when
  • Built-in ISO self-calibration procedure
  • Discharge networks that change quickly, with more than 60 optional networks
  • Pre-programmed settings for IEC 61000-4-2 and ISO 10605

Figures from the manufacturer's product page. Specifications are subject to change; the datasheet governs. Quotations on request.

Where it fits

What the NSG 438 and NSG 438A is used for

The NSG 438 is widely used in automotive and compliance laboratories. It covers practically every international standard and, through its range of optional discharge networks, the ESD standards of the vehicle manufacturers.

All settings, including polarity, repetition rate, counters and discharge detection, are available up to the maximum voltage. The discharge detector has an adjustable threshold and can be switched off when the EUT surface is non-conductive, such as a plastic housing.

Standards named by the manufacturer

IEC 61000-4-2ISO 10605
Calibration

Calibrated on site, by the people who supplied it

ESD simulators are within the accredited scope, including the NSG 438 and NSG 438A and the older Schaffner NSG 438. The NSG 438 meets the 2025 edition of IEC 61000-4-2. Calibration is carried out in your laboratory by the LAB Support Southeast Asia team, under the A2LA accredited ISO/IEC 17025 scope of LAB Support Ltd.

ESD simulator calibration →
Related

Goes with the NSG 438 and NSG 438A

Note: what IEC 61000-4-2 Edition 3.0 changed →Teseq NSG 437 →EM TEST esd NX30 →All Teseq models →
Frequently asked

Teseq NSG 438 and NSG 438A in Malaysia

Does the Teseq NSG 438 meet IEC 61000-4-2 Edition 3.0?

Yes. The NSG 438 complies with the 2025 edition. Our technical note on IEC 61000-4-2 Edition 3.0 explains what changed for the generator and its calibration.

Where can I buy the Teseq NSG 438 and NSG 438A in Malaysia?

ICX Lab Services in Penang is the authorised distributor of AMETEK CTS products, and Teseq is one of the brands under AMETEK CTS, together with EM TEST and AR. Send us the model number through the contact page or WhatsApp and we reply with a configuration and a quotation. Quotations on request.

Who installs and supports the NSG 438 and NSG 438A after delivery?

We do. ICX Lab handles delivery, installation and training, and coordinates factory service, firmware and repairs with AMETEK CTS on your behalf.

Teseq is a brand of AMETEK Compliance Test Solutions. Product name, specifications and image are taken from ametek-cts.com.

Need a quotation for the NSG 438 and NSG 438A?

Tell us the standards you test to and we will configure it with the accessories it needs.

Request a quotation   All Teseq models

Tell us what you need to test

We reply within one working day with a quote or a plan.

Contact us