The EM clamp specified in IEC 61000-4-6, for the cables on which a CDN cannot be fitted.
Figures from the manufacturer's product page. Specifications are subject to change; the datasheet governs. Quotations on request.
IEC 61000-4-6 defines three kinds of injection device. The CDN is the preferred one, and in some cases mandatory, but it needs a cable that can be cut into a known number of lines. Multi-core, screened and fixed cables often cannot be, and for those the standard provides the EM clamp.
The clamp injects the test signal onto the cable of the EUT and at the same time decouples the auxiliary equipment, so that a failure can be attributed to the EUT and not to whatever is at the other end of the cable. The matching CAL KEMZ fixture is used to set the test level.
EM clamps of the KEMZ 801 family are listed in our probe and clamp calibration service. Calibration is carried out in your laboratory by the LAB Support Southeast Asia team, under the A2LA accredited ISO/IEC 17025 scope of LAB Support Ltd.
When the cable cannot be fitted to a CDN, for example a multi-core, screened or fixed cable. IEC 61000-4-6 prefers the CDN where one is applicable and provides the EM clamp for the other cases.
ICX Lab Services in Penang is the authorised distributor of AMETEK CTS products, and Teseq is one of the brands under AMETEK CTS, together with EM TEST and AR. Send us the model number through the contact page or WhatsApp and we reply with a configuration and a quotation. Quotations on request.
We do. ICX Lab handles delivery, installation and training, and coordinates factory service, firmware and repairs with AMETEK CTS on your behalf.
Teseq is a brand of AMETEK Compliance Test Solutions. Product name, specifications and image are taken from ametek-cts.com.
Tell us the standards you test to and we will configure it with the accessories it needs.
Request a quotation All Teseq modelsWe reply within one working day with a quote or a plan.