EM TEST · automotive transient simulator

EM TEST UCS 200N

ISO 7637 pulses 1, 2, 3a and 3b from one box: burst module, micropulse module and coupling network together.

Request a quotation Datasheet at ametek-cts.com
EM TEST UCS 200N automotive transient simulator
Key facts

EM TEST UCS 200N at a glance

  • Built-in EFT/burst generator module
  • Built-in micropulse generator module for ISO 7637, JASO, SAE and manufacturer standards
  • Built-in coupling network, 80 V, up to 200 A depending on the model
  • Built-in battery switch
  • Overcurrent protection and emergency stop
  • FreeStyle mode to vary the pulse parameters beyond the standard
  • USB and GPIB, with software for Windows

Figures from the manufacturer's product page. Specifications are subject to change; the datasheet governs. Quotations on request.

Where it fits

What the UCS 200N is used for

The UCS 200N is the centre of an EM TEST automotive transient bench. Its coupling network is shared: the LD 200N load dump generator, the VDS 200 battery simulators and the PFS 200N all connect through it and control it, so the DUT is wired once.

It meets ISO 7637-2 and ISO 7637-3 and a long list of vehicle manufacturer specifications. FreeStyle mode lets a development laboratory go past the standard values to find the margin.

Standards named by the manufacturer

ISO 7637-2ISO 7637-3SAE J1113-11SAE J1113-12SAE J1455ECE R10Ford FMC 1278GMW 3097VW TL 801 01BMW GS 95002Mercedes MBN 10284-2
Calibration

Calibrated on site, by the people who supplied it

The UCS 200N50, N100, N150 and N200 are listed in our ISO 7637 transient generator calibration service. Calibration is carried out in your laboratory by the LAB Support Southeast Asia team, under the A2LA accredited ISO/IEC 17025 scope of LAB Support Ltd.

ISO 7637 transient generator calibration →
Related

Goes with the UCS 200N

EM TEST LD 200N →EM TEST VDS 200Q →EV component EMC test bench →All EM TEST models →
Frequently asked

EM TEST UCS 200N in Malaysia

Which ISO 7637 pulses does the EM TEST UCS 200N generate?

Pulses 1, 2, 3a and 3b. Load dump comes from the LD 200N and the supply voltage profiles from a VDS 200 battery simulator, both of which connect through the coupling network of the UCS 200N.

Where can I buy the EM TEST UCS 200N in Malaysia?

ICX Lab Services in Penang is the authorised distributor of AMETEK CTS products, and EM TEST is one of the brands under AMETEK CTS, together with Teseq and AR. Send us the model number through the contact page or WhatsApp and we reply with a configuration and a quotation. Quotations on request.

Who installs and supports the UCS 200N after delivery?

We do. ICX Lab handles delivery, installation and training, and coordinates factory service, firmware and repairs with AMETEK CTS on your behalf.

EM TEST is a brand of AMETEK Compliance Test Solutions. Product name, specifications and image are taken from ametek-cts.com.

Need a quotation for the UCS 200N?

Tell us the standards you test to and we will configure it with the accessories it needs.

Request a quotation   All EM TEST models

Tell us what you need to test

We reply within one working day with a quote or a plan.

Contact us