AR · 1 kW solid-state microwave amplifier

AR 1000S1G6C

A full kilowatt of Class A solid-state power across 1 GHz to 6 GHz in a single band.

Request a quotation Spec sheet at ar.ametek-cts.com
AR 1000S1G6C 1 kW solid-state microwave amplifier
Key facts

AR 1000S1G6C at a glance

  • 1000 W CW minimum from 1.0 GHz to 5.0 GHz, 700 W from 5.0 GHz to 6.0 GHz
  • Class A design, 100 % mismatch tolerant
  • Built-in fault monitoring and protection, including input overdrive above 0 dBm
  • Remote control by Ethernet, USB, GPIB, fibre-optic serial and RS-232
  • Modular design for maintenance and service, low acoustic noise
  • Three-year manufacturer's warranty
  • US export classification 3A001

Figures from the manufacturer's product page. Specifications are subject to change; the datasheet governs. Quotations on request.

Where it fits

What the 1000S1G6C is used for

One amplifier from 1 GHz to 6 GHz replaces the two or three band-split amplifiers and the switching between them that a high-level system otherwise needs. The band holds most of the radar, navigation and communication services that MIL-STD-461 RS103, ISO 11452-2 and the vehicle manufacturer specifications test against, and the 1000S1G6C is the top of a family that starts at 30 W.

Which model a programme needs is a system design question, and at this power level the mains supply, cooling air and RF cabling are part of it. Send us your test plan and we will size the amplifier with the rest of the system.

Typical standards for this product

MIL-STD-461 RS103ISO 11452-2ISO 11451-2RTCA/DO-160 Section 20IEC 61000-4-3
Calibration

Calibrated on site, by the people who supplied it

Amplifiers, including AR models, are covered by our RF component calibration. High-power amplifiers are calibrated in the system, with the coupler and power sensor of the same path at the same visit. Calibration is carried out in your laboratory by the LAB Support Southeast Asia team, under the A2LA accredited ISO/IEC 17025 scope of LAB Support Ltd.

Amplifier and RF component calibration →
Related

Goes with the 1000S1G6C

AR 2000S1G2z8, 1 to 2.8 GHz →AR 450S6G18C, 6 to 18 GHz →AR ATR26M6G-1 antenna →All AR models →
Frequently asked

AR 1000S1G6C in Malaysia

Does the AR 1000S1G6C deliver 1000 W over the whole band?

It delivers a minimum of 1000 W from 1 GHz to 5 GHz and 700 W from 5 GHz to 6 GHz, according to the manufacturer's specification.

Where can I buy the AR 1000S1G6C in Malaysia?

ICX Lab Services in Penang is the authorised distributor of AMETEK CTS products, and AR is one of the brands under AMETEK CTS, together with EM TEST and Teseq. Send us the model number through the contact page or WhatsApp and we reply with a configuration and a quotation. Quotations on request.

Who installs and supports the 1000S1G6C after delivery?

We do. ICX Lab handles delivery, installation and training, and coordinates factory service, firmware and repairs with AMETEK CTS on your behalf.

AR RF/Microwave Instrumentation is part of AMETEK Compliance Test Solutions. Product name, specifications and image are taken from ar.ametek-cts.com.

Need a quotation for the 1000S1G6C?

Tell us the standards you test to and we will configure it with the accessories it needs.

Request a quotation   All AR models

Tell us what you need to test

We reply within one working day with a quote or a plan.

Contact us